• Build
  • Your Solution
  • Here


Strip Solution Builder

GU2 – Wall Touch Controller

  • Touch Sensitive Control
  • OEM Customisation
  • 2 Year Warranty


Get a Quote

Product Overview

The dimmer switch of the 21st century with a
premium glass finish. This 128 channel DMX
controller is simple to use and yet powerful
enough for projects requiring advanced
effects. 3 touch-sensitive buttons control
scene selection, on/off, dimming and color
adjustment. Ideal for installation in the home,
hotels and public environments. The controller
is USB programmable from a PC or Mac using
ESA2 software. Up to 24 scenes can be stored
within the controller (8 visualized by the LED
lights). 1e73be

Key Features

• DMX Stand Alone Controller (128 channels)
• 3 touch sensitive buttons (on/off/mode, previous, next)
• Glass faceplate
• Up to 24 dynamic or static scenes (8 first visualized by a
led)
• Control the intensity and color of a scene as it plays
• Programmable through the included USB cable and
control software
• Compatible with any DMX fixture or DMX LED driver
• Ready to use (pre-loaded with 8 scenes and 42 RGB
fixtures)
• Latest ARM CPU technology
• Customizable design for OEM
• Wall mountable
• One dry contact trigger port on PCB

Technical Specifications

General
Software
Stand alone
Triggering
Optional
General

  • Dimensions: 86 x 86 x 11mm
  • Weight: 113g
  • USB Connection: Yes
  • DMX Channels: 128

Software

  • ESA2: PC/Mac
  • ESA: PRO 2: PC/Mac

Stand alone

  • Number of scenes: 24
  • Number of zones: 1
  • Memory capacity (20ch): 840 steps
  • Memory capacity (60ch): 310 steps
  • Power voltage: 5-15v DC
  • Power connector: Screw terminal

Triggering

  • Live Control: Color / Dimmer
  • Touch sensitive buttons: 3
  • Port triggers: 1

Optional

  • AC / DC adapter: Ref.POWER4M




Easy Installation Guide

1. Mount an electrical box in a wall

The STICK controller can be installed in a standard
60mm electrical backbox. You can insert the AC/DC
adapter inside or outside the backbox

2. Connect the wires

POWER: Connect a 5-12V 0.6A ACDC supply.
Be sure to not invert the + and the ground.
DMX: Connect the DMX cable to the lighting
receivers (LEDs, Dimmers, Fixtures..) (for XLR:
1=ground 2=dmx- 3=dmx+)

3. Mount the interface on the wall

1) Plug in the green connector box
2) Mount the interface backplate on the wall with 2 or more screws
3) Close the unit by clipping the front plate onto the back plate

ESA2 Software & Manual (Windows/Mac)

Programming the Controller

The DMX controller can be programmed from PC or MAC using the software available on our website. Refer to the corresponding software manual for more information. The firmware can be updated using the hardware manager which is included with the programming software.

Scroll to Top