x50 Pack 3 Ply Disposable Face Mask

£39.95

Availability: 28 in stock (can be backordered)

Guaranteed Safe Checkout Process

How to wear the mask correctly?

  1. Wash your hands before wearing the mask. Preferentially with a bar of lye based hand soap which is known to destroy CoronaVirus at the chemical level. Any soap with good hand washing technique is still better than nothing.
  2. The white colour fabric should be on the inside (towards the mouth) and the blue should face outwards.
  3. Pull a single mask away from the others out of the pack by the straps. Keep the pack in an isolated place away from others. This is to avoid potential cross contamination.
  4.  After the mask is positioned on the face, adjust slightly to cover the lower part of your face and create as tight a seal as possible. Then bend the metal strip (top of mask) on both sides to create a bridged arch across the nose. Squeeze the metal tightly and adjust accordingly.
  5. Stretch the mask down to cover the nose and mouth and make sure it fits closely with the bridge on the nose and cheek. You want a tight seal all around as best as possible.Tips: The mask is disposable, please replace it after continuous wearing for 4 hours. The used masks need to be wrapped in plastic bags and thrown into a toxic / quarantine dustbin to avoid further contamination. Thank you.Important Note: Let’s say you are short on masks and want to re-use them. An option and this should only be considered as a last resort is as follows: Use the mask for a short duration i.e a trip to the store (30 minutes – 1 hour window). Take the mask off by the straps and place it in a quarantine location out the way of other people preferably somewhere hot. Re-use in 7 days time and have masks in a continuous rotation paying close attention to them. WARNING: It’s extremely important the due care and process be taken with this method. You do not want cross contamination or potential of infection. This really is a last resort to keeping some level of essential protection for venturing out in public whereby PPE or masks are extremely limited.
  • IN STOCK NOW UK
  • Product Name: Disposable Protective Mask
  • Main raw materials: Outer layer (25g . m2 nonwovens); inner layer (25g / m2 polypropylene nonwovens); middle layer (25g / m2 polypropylene melt blown nowovens)
  • Executive Standard No: EN 14683:2005
  • Product Specification: 17.5cm*9.5cm
  • Date of Manufacture: 31/03/2020
  • Term of validity: Two years
  • Disinfection method: Non sterilisation
  • Keep on storage: The packed finished products shall be stored in relative humidity of less than 80%. The warehouse or environment should be ventilated, dry, clean and free of harmful gases.
  • x50 pcs supplied in sealed packaging.
  • Second Usage: No second use (except in extraordinary circumstances, see above advice on re-use. Best to dispose carefully after a single use)
  • Packaging Useage: Do not use when package is damaged
  • Dry: Keep Dry
  • Sun: Avoid sunning
  • HOW TO APPLY: When putting the mask on ensure that you take the following steps. 1) Wash hands, 2) Separate mask carefully from pack avoiding contact with other masks. 3) Pick up by ear straps. 4) Place mask on face. 5) Ensure mask is level on the face. 6) Bend top metal clip and adjust onto nose. 7) Ensure face there are no side holes, shaving of facial hair is necessary to allow for a closed seal. 8) When removing mask to be re-used DO NOT touch the front of mask. Take off by ear straps and place the mask in a dedicated place. 9) Wash hands.
  • IMPORTANT: These masks are usable for upto 4 hours
  • NOTES: These masks should be considered as a “Preventative”, “Last Resort” type scenario OR “now’s the time” situation due to increased cases. Always use best judgement to protect your family, friends, colleagues and community. Remember COMMUNICATION about social distancing, door handle/surface cleaning, healthy diet, environmental safeguarding and community protection ahead of time is the best preventative measure.
  • To the top of the mask is a bendable metal clip that can be adjusted to your nose. This provides a secure fit.
  • Non-woven fabrics PM2.5 provides a respiratory layer of protection. An Anti-Particle, Anti-Dust, Anti-viral, Anti-pollen mask. For at least 95% filtration efficiency against certain non-oil based particles like dust. The intermediate layer material uses better fused-jet cloth, effectively blocking dust, bacteria.
  • Inner Activated carbon filter layer increases filtration efficiency versus dust, pollen, gases, odors and It can effectively separate PM2.5 fine particles and bacteria.
  • Elastic ear-loops with no added pressure to the ears. Comfortable material which does not rub your face.
Weight 0.5 kg
Dimensions 10 × 10 × 5 cm

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “x50 Pack 3 Ply Disposable Face Mask”

Your email address will not be published. Required fields are marked *

Scroll to Top