A 2M (2000mm) extension cable with plug and play *input micro connector that works with our cabinet LED driver range.
Features & Benefits
1x input cable with male micro connector one end and bare wires the other end.
Smaller sleeker design than other 2M cables for a tidier fitout.
We supply various LED lights, Strip Lights, Spot Lights and plug & play LED driver kits, please search our store or call us on 0116 406 2959 or email us at sales@upriseled.com for more further project completion support.
Plugs into multi-output style cabinet LED driver system. Ideal for DIY or professional kitchen, walk-wardrobes, cabinet or shelving installations.
A non-rewireable, fully encased moulded power lead.
Mains/battery powered equipment connection lead
Plug has integral 3A fuse
Manufactured from 0.5mm² approved, 2-core cable
Rated 240V, 3A
Connector to Connector: Mains Plug, UK to IEC 60320 C7
Connector Type A: Mains Plug, UK
Connector Type B: IEC 60320 C7 (Figure 8)
Current Rating: 3A
Cable Length - Metric: 2m
Voltage Rating: 240VAC
Jacket Colour: Black
Cable Length - Imperial: 6.6ft
EU / US plugs available on request.
Cabinet LED Drivers Q&A Sheet PDF--30W 6 Output Cabinet Display LED Driver 24V (Includes hand sensor)
This 6 output, slimline cabinet LED driver by Uprise offers quick and simple PowerUp to single colour LED tape lights. Ideal for areas where space is limited and a thin LED power source is required. With it’s 30W capacity and 6 micro connectors upto x6 24V LED products / LED tape strips can be connected effortlessly. Complete with next generation hand wave technology means turning your lighting setup on/off has never been easier.
Download Cabinet LED Drivers Q&A Sheet PDF for more support.
Outputs
With 6 micro connectable outputs you can easily run 6 separate LED areas or shelves.
Hand Sensor
Complete with a detectable hand sensor, turning your lights on/off has never been easier.
Power Consumption
Our PowerUp cabinet display LED PSU is rated at 30W.
Size
Ultra thin design at just 18mm depth for hidden installation. 120mm x 55mm x 18mm
Wiring
6 outputs with DuPoint terminals. Keep wiring tidy and professional.
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our PowerUP LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 24V seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 30W - 10% (27W) to build in a safety buffer.
Application
A thin and functional LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
The driver is only 4mm wide and standard IP20 rated. This provides complete protection against solid items over 12.5mm like finger touch. LED strip lights with IP20 rating are perfect for inside applications.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this PowerUp 30W LED driver with a range of our seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Color consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: 6 output cabinet LED driver
IP Rating: IP20
Brand: PowerUp
Electrical
Power Range: 18W-30W
Input Voltage: 100-240V
Output Voltage: 24V
Output Current (A): 2.5A
Outputs: x6 micro connectors
Power Factor: 0.6
Efficiency: 83%
Dimensions
Width: 55mm
Height: 18mm
Length: 120mm
Installation
Mounting: x2 Screws
Guarantee
Certification: CE, RoHS
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 292g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 24V 2 core single colour LED tape strip or 24V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
30W Constant Voltage LED Driver 24V
This small constant voltage LED driver by Uprise offers quick and simple PowerUp to 24V LED lights and single colour LED tape lights. Ideal for areas where space is limited and a tiny LED power source is required. With it’s 30W capacity and simple connection small 24V LED products / LED tape strips can be connected effortlessly.
Output
24V +/- connection for connection with 24V LED lamps, market LEDs or LED tape lights.
Power Consumption
Our PowerUp 30W small constant voltage LED PSU is rated at 30W.
Size
Small design at just 22mm depth for hidden installation. 95mm x 45mm x 24mm
Wiring
2 core cable connected to +/- connectors
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our PowerUP LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 24V seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 30W - 10% (27W) to build in a safety buffer.
Application
A thin and functional LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this PowerUp 30W super small constant voltage LED driver with a range of our single colour & seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Colour consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: Constant Voltage LED driver
IP Rating: IP20
Brand: PowerUp
Electrical
Power Range: 30W
Input Voltage: 100-240V
Output Current (A): 1.25A
Output Voltage: 24V + / - connection
Power Factor: 0.6
Efficiency: 83%
Dimensions
Width: 45mm
Height: 24mm
Length: 95mm
Installation
Mounting: x2 Screws at corners
Guarantee
Certification: CE, RoHS
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 80g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 24V 2 core single colour LED tape strip or 24V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
30W Mini LED Driver 24V
This mini constant voltage LED driver by Uprise offers quick and simple PowerUp to 24V LED lights and single colour LED tape lights. Ideal for areas where space is limited and a miniature LED power source is required. With it’s 30W capacity and simple connection small 24V LED products / LED tape strips can be connected effortlessly.
Output
24V +/- connection for connection with 24V LED lamps, market LEDs or LED tape lights.
Power Consumption
Our PowerUp 30W mini constant voltage LED PSU is rated at 30W.
Size
Super small design at just 22mm depth for hidden installation. 41mm x 19mm x 91mm
Wiring
2 core cable connected to +/- connectors
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our PowerUP LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 24V seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 30W - 10% (27W) to build in a safety buffer.
Application
A thin and functional LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this PowerUp 30W miniature constant voltage LED driver with a range of our single colour & seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Colour consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: Constant Voltage LED driver
IP Rating: IP20
Brand: PowerUp
Electrical
Power Range: 30W
Input Voltage: 100-240V
Output Current (A): 1.25A
Output Voltage: 24V + / - connection
Power Factor: 0.6
Efficiency: 83%
Dimensions
Width: 41mm
Height: 19mm
Length: 91mm
Installation
Mounting: x2 Screws at corners
Guarantee
Certification: CE, RoHS
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 30g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 24V 2 core single colour LED tape strip or 24V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
36W 5 Output Undercabinet LED Driver 12V
*Includes x1 black coloured 1M (1000mm) UK mains plug to C7 kettle lead.
This 5 output, slimline undercabinet led lighting driver by Uprise offers quick and simple setup for single colour spot lights, furniture lights & LED tape lights. Ideal for areas where space is limited and a thin 12V LED power source is required. With it’s 24W capacity and 5 micro connectors upto x5 12V LED products / LED strips can be connected effortlessly. Compatible with next generation hand wave sensors as well as single and double door sensors means turning your lighting setup on/off has never been easier. Download Cabinet LED Drivers Q&A Sheet PDF for more support.
Outputs
With 5 micro connectable outputs you can easily run 5 separate LED areas or shelves.
Connectable Accessories
Connect a hand wave, touch, or even a single door or double sensor (inline or master).
Power Consumption
This under-cabinet kitchen LED driver is rated at 36W.
Size
Ultra thin design at just 18.5mm depth for hidden installation. 147mm x 56mm x 18mm
Wiring
5 way distributor outputs with micro connection terminals. Keep wiring tidy and professional.
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our Uprise LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 12V marker LED downlights, cabinet pad downlights, seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 36W - 10% (32.4W) to build in a safety buffer.
Application
A thin and functional multi-port LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
The driver is only 56mm wide and standard IP20 rated. This provides complete protection against solid items over 12.5mm like finger touch.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this Uprise 12V 24W LED driver with a range of our seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Colour consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: 5 output cabinet LED driver (5 way distributor ports built in)
IP Rating: IP20
Brand: Uprise
Electrical
Power Range: 32W-36W
Input Voltage: 200-240V
Output Voltage: 12V +/- 5%
AC Input Current: 0.36A
3A Port: 5
Outputs: x5 micro connectors (5-port micro plug connector)
Wattage: 36W
Voltage: 12V
Surge Protection: 1.5Kv
Sensor Connectivity
Sensor Port: PHB 2.0
Sensor Compatibility: Hand Wave Sensor / Touch Sensor / Single Door Switch / Double Door Switch
Dimensions
Width: 56mm
Height: 18mm
Length: 147mm
Installation
Mounting: x2 Screws
Guarantee
Certification / Standards: CE, SELV, RoHS, UKCA
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 375g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 12V 2 core single colour LED tape strip or 12V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call / WhatsApp us on 07957 180 481 or email us at sales@upriseled.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
36W 5 Output Undercabinet LED Driver 24V
*Includes x1 black coloured 1M (1000mm) UK mains plug to C7 kettle lead.
This 5 output, slimline undercabinet led lighting driver by Uprise offers quick and simple setup for single colour spot lights, furniture lights & LED tape lights. Ideal for areas where space is limited and a thin 24V LED power source is required. With it’s 24W capacity and 5 micro connectors upto x5 24V LED products / LED strips can be connected effortlessly. Compatible with next generation hand wave sensors as well as single and double door sensors means turning your lighting setup on/off has never been easier. Download Cabinet LED Drivers Q&A Sheet PDF for more support.
Outputs
With 5 micro connectable outputs you can easily run 5 separate LED areas or shelves.
Connectable Accessories
Connect a hand wave, touch, or even a single door or double sensor (inline or master).
Power Consumption
This under-cabinet kitchen LED driver is rated at 36W.
Size
Ultra thin design at just 18.5mm depth for hidden installation. 147mm x 56mm x 18mm
Wiring
5 way distributor outputs with micro connection terminals. Keep wiring tidy and professional.
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our Uprise LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 24V marker LED downlights, cabinet pad downlights, seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 36W - 10% (32.4W) to build in a safety buffer.
Application
A thin and functional multi-port LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
The driver is only 56mm wide and standard IP20 rated. This provides complete protection against solid items over 12.5mm like finger touch.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this Uprise 24V 24W LED driver with a range of our seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Colour consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: 5 output cabinet LED driver (5 way distributor ports built in)
IP Rating: IP20
Brand: Uprise
Electrical
Power Range: 32W-36W
Input Voltage: 200-240V
Output Voltage: 24V +/- 5%
AC Input Current: 0.36A
3A Port: 5
Outputs: x5 micro connectors (5-port micro plug connector)
Wattage: 36W
Voltage: 24V
Surge Protection: 1.5Kv
Sensor Connectivity
Sensor Port: PHB 2.0
Sensor Compatibility: Hand Wave Sensor / Touch Sensor / Single Door Switch / Double Door Switch
Dimensions
Width: 56mm
Height: 18mm
Length: 147mm
Installation
Mounting: x2 Screws
Guarantee
Certification / Standards: CE, SELV, RoHS, UKCA
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 375g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 24V 2 core single colour LED tape strip or 24V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call / WhatsApp us on 07957 180 481 or email us at sales@upriseled.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
A non-rewireable, fully encased moulded power lead.
Mains/battery powered equipment connection lead
Plug has integral 3A fuse
Manufactured from 0.5mm² approved, 2-core cable
Rated 240V, 3A
Connector to Connector: Mains Plug, UK to IEC 60320 C7
Connector Type A: Mains Plug, UK
Connector Type B: IEC 60320 C7 (Figure 8)
Current Rating: 3A
Cable Length - Metric: 3m
Voltage Rating: 240VAC
Jacket Colour: Black
Cable Length - Imperial: 9.84ft
*In stock UK for next day delivery or same day collection (Lutterworth, Leicestershire).
This sleek 3 core (CCT / Digital Pixel) extension cable allows you to extend the lighting cable attached to our multi-output 3 or 6 output 3 pole LED distributor. Please get in touch if you require any support with additional extension cable.
Features & Benefits
4x Male/Female output CCT (3 core) extension cables supplied
Smaller sleeker design than other 3 wire 2M extension cables for a tidier fitout.
This 2M lighting extension cable is used to achieve a longer run from your smart white (CCT) or digital pixel (5V - 3 core) LED light source to your driver.
These extension cables can also be joined together to create even longer lengths to your lights.
We supply various LED lights, Strip Lights, Spot Lights and plug & play LED driver kits, please search our store or call us on 0116 406 2959 or email us at sales@upriseled.com for more further project completion support.
Connectivity Examples
Mains > 12V / 24V Power Supply (PSU) > 6 Output 3 Core Distributor > [Male] 2M 3 Core Extensions Cable [Female] > [Male] 3 wire LED light source (CCT LED strip light or cabinet light).
Short Description
A 2M (2000mm) 3 pole (3 wire) extension cable with plug and play female (input) and male (output) micro connectors.
*In stock UK for next day delivery or same day collection (Lutterworth, Leicestershire).
This sleek cable allows you to extend the lighting cable attached to a multi-output cabinet LED driver module. Please get in touch if you require any support with additional extension cable.
Features & Benefits
4x Male/Female output extension cables supplied
Smaller sleeker design than other 2M extension cables for a tidier fitout.
This 2M lighting extension cable is used to achieve a longer run from your light source to your driver.
These extension cables can also be joined together to create even longer lengths to your lights.
We supply various LED lights, Strip Lights, Spot Lights and plug & play LED driver kits, please search our store or call us on 0116 406 2959 or email us at sales@upriseled.com for more further project completion support.
A 2M (2000mm) extension cable with plug and play female (input) and male (output) micro connectors that works with our cabinet LED driver range.
Support Videos
Seamless Lighting Simplifed - Uprise Company Overview Video
[Y] ep1 - Best way to connect a 5M 4mm COB LED strip to driver (24V)
Description
A super slim white cob led tape light that offers seamless light throughout the strip. 5W per meter with a 2700K / 3000K / 4000K / 6000K colour temperature temperature, it's ideal for tight grooves, cabinet displays or shelving units. Comes with 0.5M tail and plug & play that connects to 24V LED power supplies.
Compatible Products (LED Solution)
Cabinet LED Drivers
60W 7 output cabinet LED driver (24V) with mains lead
24W 5 output cabinet LED driver (24V) with mains lead
Cabinet LED Sensors
Furniture LED sensors for cabinets, drawers, walk in wardrobes
Extension Cables
2M / 3M / 4M / 5M male-female 2 core flat LED extension cables
Product Datasheets
Product Data Sheet (Branded)Product Data Sheet (Unbranded)
How to connect COB LED tape lights simply.
--
Seamless PRO COB LED Tape 4W per meter IP20
Supplied as 1M / 3.5M / 5M reel as standard. Enterprise class quality with the latest in integrated LED technology.
Article - The Definitive Guide to COB LED Strip Lights
Seamless cob LED tape by Uprise. A revolutionary new PCB design mounted LED strip light with a uniform "micro dot" LED configuration for the most beautiful light line you've ever witnessed. Our 4 watts per meter flexible COB (Chip on-board) LED strip light provides a stunning flow of ambience throughout. Innovative cut of the cloth design means LEDs are closely knitted directly to the PCB substrate. A clever design that offers maximum efficacy and flexibility. This combined with a unique "bubble doming" silicone coating method ensures a stable, reliable solution for professional integrations. Lighting brilliance to put it simply.
Wiring Example
This precision engineered 24V COB LED tape strip is just 4W/M offering excellent efficiency and upto 700 lumens per meter output. 480 LEDs per meter allow for a continuous, homogeneous illumination throughout the strip. Available colours include 2700K warmer white, 3000K warm, 4000K neutral white and 6500K cool.
Lifetime expectancy is 50,000 hours of continuous use. 25mm cut points. 4mm wide. 12V. 2 core wiring.
Here at Uprise we aim to provide the utmost value and integrity throughout the entire supply process. From first point of call to happy result. That's why we ensure carefully selected high tolerance components are utilised. This means we've done our due diligence throughout the design and selection process ensuring premium quality throughout. High grade LED chips have been utilised for superior quality in strip longevity and effect.
Specifications
General
Product Type: Seamless No Dot LED Tape (4W/M)
Colour: Warmer White (2700K) / Warm White (3000K) / Neutral White (4000K) / Cool White (6500K)
IP Rating: IP20 (Internal)
PCB Colour: White
Chip: COB (Chip on board) Flip Chip Technology
LEDs per meter: 480LEDS
LED Life: 70% @ 50,000 Hours
Brand: Uprise
Light Characteristics
Lumens/m: 700lm/m
Lumens/w: 105lm/W
High CRI: 85+
Beam angle: 180°
Electrical
LED Wattage (Per meter): 5W
Input Voltage: 24V DC
Current (A): 0.166A/m
Cable in: 500mm 2 core with micro connector (as standard) for seamless installation with our professional cabinet LED drivers & sensor range. 3.5M+ lengths includes x2 0.5M tails with micro connectors either end.
Cable out: 500mm 2 core (as standard) with male micro connector (3.5M+ lengths only)
Dimensions
Width: 4mm
Height: 2mm
Length: 1M, 1.8M, 2M, 2.5M, 3M, 3.5M, 4M, 5M, 10M (as standard), available in bespoke custom cut to lengths, call us on 0116 406 2959, email us at sales@upriseled.com or send us a project request on 07957 180 481.
Installation
Cut points: 50mm
Cable: 2 core flat cable
Mounting: 3M backing tape
Guarantee
Certification: CE, RoHS
Warranty: 3 Years
Packaging
Packaging: 1M / 3.5M as standard / 5M Roll or custom lengths available on request.
Net Weight: 152g/Roll
Product Questions & Answers
Q) Are these 4mm COB LED strips lights waterproof?A) The 4mm COB LED tape light is IP20 meaning it is not waterproof and ideally suited for internal applications.
Q) Would this work if I connect it to a sensor switch?A) Yes, our cabinet LED drivers are compatible with many of our different types of sensors. For example we offer a single, double door sensor ideal for kitchen cabinets and walk-in wardrobes along with PIR and 1-100% on/off silver touch sensors. These sensors are available in both an [inline] and [master] type. Inline means that it connects to one of the LED accessory ports between the driver and LED light. Master means it connects to the master port of the driver for full control of every LED light attach to the inline driver ports.
Q) I purchased a 12V 2700K 5M COB LED strip length back in August 2022 and notice an ever so slight brightness decrease towards the end of the strip. Why is this and what can I do to stop it? A) This is due to voltage drop, due to the number of micro COB LEDs (chip on board) and overall length of strip you will notice a slight drop in power and brightness towards the end. To avoid this simple power it from both ends, you can do this by soldering a return cable onto the other end. Alternatively you can add a slide on connector and wire the bares to your associated constant voltage power supply.
Q) After I cut the 5M light strip into 4 segments of the lengths I wanted, how do I power these 4 segments?A) You can do this by first ensuring you have cut across the designated copper solder pad intervals. These can be soldered to. Second you would then solder a +/- cable to each segment and connect to a designated constant voltage power supply. This can either be done in series or parralell. Here are the wiring scenarious: 1) 12V Series: Power Supply > Strip > Strip > Strip > Strip > Return (If over 3.5M) 2) 24V Series: Power Supply > Strip > Strip > Strip > Strip > Return (If over 5M) 3) 12V/24V Paralell: Power Supply > 4 Strips on seperate lines. Please Note: If you are unsure, please consult a qualified electrician or electrical contractor before carrying out any electrical works.
Q) Hi, I purchased this a few months back and the COB LED tape is not working. It's not lighting up?A) Dear Uprise Customer: Please can you check that the mains power source is turned on. Alternatively, if you're seamless LED strip has a micro connector, please check that this is securely connected to either the extension cable, sensor or Cabinet LED driver. Check all the micro connectors are secure and connected.
Q) What is the power consumption and IP rating and for a 5 metre strip? ThanksA) Dear Uprise Customer: The power consumption for this 4mm 5M spot free COB LED strip is advised at 4W/M.5M Powered one end: 19W or 3.8W/M.5M powered from both ends: 24W or 6W/M. The IP rating is IP20, which means it's ideal for internal applications and offers no splash proofing or liquid resistance.
Q) Can I cut this strip and how far apart can I cut?A) Yes this strip can be cut at each cutting interval. Marked as a small black line. Be carefulA) You can cut this 24V 4mm COB LED strip at every 50mm (5cm) cut point.
Q) Can I cut this strip and how far apart can I cut?A) Yes this strip can be cut at each cutting interval. Marked as a small black line. Be carefulA) You can cut this 24V 4mm COB LED strip at every 50mm (5cm) cut point.
Q) Do you sell this in 1m or other custom size lengths? I'm using this for under-counter lighting and cabinet light and have a gap between for the cooker. Thank you!A) Dear Uprise customer: Yes we offer a cut for you service or alternatively you can buy a 5M length and cut & solder yourself. It's entirely upto you. Email us at sales@upriseled.com to discuss your kitchen worktop, under-cabinet or drawer light application. We're here to help.
For this 3000K 4mm "dot free" COB LED strip you can also consider putting it into a further micro channel for a more complete, finished look.
Q) Can these be joined or extended, let's say if i need 9m of light in one run?A) Yes, we've tested upto 14M with a return. The strips can be soldered together at the copper solder intervals. You need a return cable (ring mains - series) to power effectively. If in doubt give us a call on 07957 180 481 or consult with a qualified electrical professional.
Project Support
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
Can you custom cut this strip to length?
We can custom cut your LED tape lights, Neon Flex and LED extrusion profiles to exact specification. Contact us for more information.
What aluminium LED extrusions can I fit this into?
This product is 4mm wide and will fit into all LED profiles with an inside width of 4mm and above.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I've purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we're here to help.
[VIDEO] How can I extend the cable easily between COB LED strips?
A Super thin 5W COB LED strip light that creates a continuous, seamless light line result. Select a colour that suits, ideal for kitchens, under cabinets, shelf lighting, wardrobes, routed linear crevices, retail POS displays, highlights and more.
Support Videos
Seamless Lighting Simplifed - Uprise Company Overview Video
[Y] ep1 - Best way to connect a 5M 4mm COB LED strip to driver (24V)
Compatible Products (LED Solution)
POWERUP Furniture LED Drivers
60W constant voltage furniture LED driver (24V) > 6CH single colour wifi connectable controller receiver (12V-24V)
Cabinet LED Drivers
60W 7 output cabinet LED driver (24V) with mains lead
24W 5 output cabinet LED driver (24V) with mains lead
Cabinet LED Sensors
Furniture LED sensors for cabinets, drawers, walk in wardrobes
Extension Cables
2M / 3M / 4M / 5M male-female 2 core flat LED extension cables
Product Datasheets
Product Data Sheet (Branded)Product Data Sheet (Unbranded)
How to connect COB LED tape lights simply.
Super narrow 4mm COB LED tape. No-Dot lighting made easy.
This 5-watt COB LED strip is a continuous LED lighting source that is ultra narrow and very flexible, making it excellent for a variety of applications. This high lumen LED tape, which uses branded COB LEDs and is manufactured to a high quality standard, produces up to 573.9 (6000K) lumens per meter, while consuming only 5 watts per meter. A normal life expectancy is 50,000 hours of continuous use.
24V COB LED Strip Wiring Scenarios
1) Plug & Play Furniture System (on/off): UK Mains > 2M UK plug to C7 mains lead > 24V 24W Furniture Cabinet Light Driver > 24V COB LED strip light
2) Plug & Play Furniture System w/sensor: UK Mains > 2M UK plug to C7 mains lead > 24W / 60W Furniture LED Driver (24V) > Furniture Sensors > 24V COB LED strip light
3) Plug & Play Multi-Port (6) Wifi/Remote Furniture Light System: UK Mains > 2M UK plug to C7 mains lead > 60W Furniture LED Driver (24V) > Single Channel Wifi Connectable Controller Receiver > 24V COB LED strip light < Single Colour Remote Handset / Smart Device Control.
Articles
The Definitive Guide to COB LED Strip Lights
Colour Temperatures
Uprise has a wide range of LED strip lights to accommodate your needs, from roasting deep warm whites to cool white shades. We offer a standard range of kelvin temperatures that match to 2700K, 3000K, 4000K, and 6000K. Do you have a colour in mind? Any bespoke manufacturing requirements you may have can be discussed with us.
Colour Rendering Index (CRI)
This flexible LED tape light is available in CRI>90.
Brightness (Lumen Output)
This luminous LED ribbon produces 481.05lm/m (2700K), 512.8lm/m (3000K), 550.75lm/m (4000K), and 573.9lm/m (6000K) typically.
Light Diffusion
When illuminating any surface, our COB LED tape lights provide a seamless linear effect as standard. Our LED tape strips can be used in combination with our extruded aluminium channels, commonly known as LED profiles. The light source of the LED strips will be evenly dispersed when they are fitted within profiles.
Wiring Example
Choose your length
Uprise's 5-watt COB LED tape light, like our other bendable strip light series, comes in standard 5M reels and may be cut at each 50mm soldered (copper coloured) segment. If you require specific lengths, large or small, we can cut your tape to length.
Application
This ultra narrow COB LED tape light is suitable for fitouts within cabinet displays, under pelmets, shelves, signage and within coves.
The LED strip is only 4mm wide and standard IP20 rated. This provides complete protection against solid items over 12.5mm like finger touch. LED strip lights with IP20 rating are perfect for inside applications.
IP Rating Options
This LED strip is available in IP20. Feel free to contact us on 0116 406 2959 or email us via sales@uprisemed.com to talk to an expert. We'll assist you to choose the right strip to apply.
See our IP rating charts here for additional information about the ideal strip for your application.
Environments
This strip light offers bright lighting for commercial applications, which is suitable for luxury resorts, restaurants, bars, hotel lobby areas as well as retail environments and window displays. When in need of a super narrow, bright, long lasting LED strip, this product is ideal for architects, lighting designers, AV integrators, electrical contractors and trade professionals alike.
It is perfectly suited for outside garden areas such as edge lights, garden bars and steps, living rooms, kitchens and home movies.
Quality Assurance
Uprise believes in long term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Colour consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip.
Specifications
General
Product Type: Seamless COB LED Tape
Colour: 2700K / 3000K / 4000K / 6000K
IP Rating: IP20
PCB Colour: White
Chip: COB (Chip on board) technology
LEDs per meter: 480LEDs
LED Life: 70% @ 50,000 Hours
Brand: Uprise
Light Characteristics
Lumens/m: 481.05Lm/m (2700K), 573.90Lm/m (6000K)
Lumens/w: 96.21Lm/w (2700K), 114.78Lm/m (6000K)
CRI: >90
Beam angle: 180°
Electrical
LED Wattage (Per meter): 5W
Input Voltage: 24V
Current (A): 0.21A
Cable in: 500mm 2 core (as standard)
Cable out: 500mm 2 core (as standard)
Dimensions
Width: 4mm
Height: 2mm
Length: 5m (as standard)
Installation
Cut points: 50mm
Cable: 2 core flat cable
Mounting: 3M backing tape
Guarantee
Certification: CE, RoHS
Warranty: 5 Years
Packaging
Packaging: 5M Roll
Net Weight: 152g / Roll
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
Can you custom cut this 4mm cob led tape strip to length?
We can custom cut your LED tape lights, Neon Flex and LED extrusion profiles to exact specification. Contact us for more information.
What aluminium LED extrusions can I fit this into?
This product is 4mm and will fit into all LED profiles with an inside width of 4mm and above.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
Input Voltage: 12-24V DC Output Voltage: 5 x 12-24V DC Output Current: 5CH, 3A/CHOutput Power: 5 x 36-72W (12/24V)Control Distance: 30mDimming Range: 0-100%Warranty: 5 Years
A 5M (5000mm) extension 5 core flat cable length. Ideal for extending the cable tail of any of our RGBW seamless or standard LED tape lengths to 5M (5000mm). Cut to length with bare ends revealed ready for connection.
A fun and adventurous LED lighting solution for everyone. Our dot free COB LED strip light kits are easy to setup, simply click, click, play. The result is a slim, seamless light line that's ideal for many types of applications. An excellent choice for the home and commercial usage. Mount freestanding or place within LED profile for an absolutely seamless "no dot" impression.
Support Videos
Seamless Lighting Simplifed - Uprise Company Overview Video
[Y] ep1 - Best way to connect a 5M 4mm COB LED strip to driver (24V)
--
No Dot 12V COB LED Tape Kits With Driver, 0.5M long QuickClick Cables with micro connectors.
Kit Includes
x1 2.5M (2500mm) LED strips with 0.5M (500mm) tails and micro connector ends (For fast connection). Packed on a reel.
x1 24W 12V plug and play cabinet style LED driver (Quick Connect)
x1 2M mains plugs with C7 type connector (plugs directly into cabinet LED driver).
Wiring Setup
Mains > 2M UK to C7 Mains Lead > 24W Driver (12V) > COB LED strip (12V)
Application Ideas
Domestic: Kitchens, Coves, Cabinets, Work tops, Under Cabinets, Drawers, Home Offices, Media Walls, Plaster-in light lines, TV surrounds, Vanity Mirrors,
Commercial: Window Displays, Retail Environments, Hotel Lobbies, Conference Rooms, Stage Sets, Shelving, Cove Lighting.
[Video] Support
How to connect COB LED tape lights simply.
Specifications
COB LED Tape
Product Type: Seamless No Dot LED Tape (7W)
Colour Options: Warm White (3000K) / Neutral White (4000K) / Cool White (6000K)
IP Rating: IP20 (Internal)
PCB Colour: White
Chip: COB (Chip on board) Flip Chip Technology
LEDs per meter: 480LEDS
LED Life: 70% @ 50,000 Hours
Brand: Uprise
Light Characteristics
Lumens/m: 900lm/m
Lumens/w: 80-120lm/W
High CRI: 90
Beam angle: 180°
Electrical
LED Wattage (Per meter): 7W
LED Wattage (Per 2.5M run): 17.5W
Input Voltage: 12v DC
Current (A): 0.75A/m
Cable in: 500mm 2 core (as standard)
Cable out: 500mm 2 core (as standard)
COB LED Strip Dimensions
Width: 5mm
Height: 2mm
Lengths: 2.5M COB LED strip light. Can be cut to any length at 25mm cut points.
Installation
Cut points: 25mm
Cable: 2 core flat cable
Mounting: 3M backing tape
Guarantee
Certification: CE, RoHS
Warranty: 2 Years typical (1 year modified back to base warranty on modified strip lengths)
Packaging
Packaging: 1 x 2.5M Roll as standard.
Net Weight: 152g/Roll
*Please Note: No more than 2.5 metres of 5mm 7W/M COB LED tape should be connected to a single port. Any length over 3M will suffer from voltage drop (a trail off of brightness towards the end of strip). For uniformity of light power from both ends, 3M+. Speak to one of our expert advisors today via sales@upriseled.com
Article - The Definitive Guide to COB LED Strip Lights
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
Can I cut this COB LED strip to length?
Yes, it can be cut easily at every 25mm indicated cut point. Alternatively we can custom cut your LED tape lights, Neon Flex and LED extrusion profiles to exact specification. Contact us for more information.
How do I connect an extension cable to the LED tape?
This LED tape kit comes with 10mm wide LED tape to 2 core cable connectors. Simply push the ends of tape into one side of the connector and the 2 core cable into the other. Once both are firmly in place clamp down the metal connection spokes with a pair of plyers. This results in a secure circuit. It's important to ensure the polarity of the + / - are correctly orientated, please check this.
What aluminium LED extrusions can I fit this into?
This product is 8mm and will fit into all LED profiles with an inside width of 8mm and above.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@upriseled.com and a member of our team will help you with your project.
What support will I receive once I've purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we're here to help you get a finished result that lasts.
Support Videos
Seamless Lighting Simplifed - Uprise Company Overview Video
[Y] ep1 - Best way to connect a 5M 4mm COB LED strip to driver (24V)
Description
A super slim white 5mm cob led tape light that offers seamless light throughout the strip. Using the highest grade, latest generation micro LED chips this professional COB LED tape light is ideal for bespoke kitchens, furniture lighting and media unit integration.
Compatible Products (LED Solution)
Cabinet LED Drivers
60W 7 output cabinet LED driver (12V) with mains lead
24W 5 output cabinet LED driver (12V) with mains lead
Cabinet LED Sensors
Furniture LED sensors for cabinets, drawers, walk in wardrobes
Extension Cables
2M / 3M / 4M / 5M male-female 2 core flat LED extension cables
This ultra energy efficient strip is just 7-watt per meter. Available in a choice 3000K warm white / 4000K neutral (day light) / 6500K cool white temperatures, it's ideal for tight grooves, cabinet displays or shelving units. Complete with hand soldered pre- 2M tail for plug & play connection our our range of 12V cabinet LED drivers. Save time from project start of spec to long-term satisfaction.
How to connect COB LED tape lights simply.
--
Seamless PRO COB LED Tape 7W per meter (5M) IP20
Supplied as 5M reel as standard. Enterprise class quality with the latest in integrated LED technology.
Article - The Definitive Guide to COB LED Strip Lights
Seamless cob LED tape by Uprise. A revolutionary new PCB design mounted LED strip light with a uniform "micro dot" LED configuration for the most beautiful light line you've ever witnessed. Our 5 watts per meter flexible COB (Chip on-board) LED strip light provides a stunning flow of ambience throughout. Innovative cut of the cloth design means LEDs are closely knitted directly to the PCB substrate. A clever design that offers maximum efficacy and flexibility. This combined with a unique "bubble doming" silicone coating method ensures a stable, reliable solution for professional integrations. Lighting brilliance to put it simply.
Wiring Example
This precision engineered 12V COB LED tape strip is just 7W/M offering excellent efficiency and upto 700 lumens per meter output. 480 LEDs per meter allow for a continuous, homogeneous illumination throughout the strip. Available colours include 3000K warm, 4000K neutral and 6500K cool.
Lifetime expectancy is 50,000 hours of continuous use. 25mm cut points. 5mm wide. 12V. 2 core wiring.
Here at Uprise we aim to provide the utmost value and integrity throughout the entire supply process. From first point of call to happy result. That's why we ensure carefully selected high tolerance components are utilised. This means we've done our due diligence throughout the design and selection process ensuring premium quality throughout. High grade LED chips have been utilised for superior quality in strip longevity and effect.
Specifications
General
Product Type: Seamless No Dot LED Tape (7W/M)
Colour: Warm White (3000K) / Neutral White (4000K) / Cool White (6500K)
IP Rating: IP20 (Internal)
PCB Colour: White
Chip: COB (Chip on board) Flip Chip Technology
LEDs per meter: 480LEDS
LED Life: 70% @ 50,000 Hours
Brand: Uprise
Light Characteristics
Lumens/m: 450-550lm/m
Lumens/w: 72lm/W
High CRI: 90+
Beam angle: 180°
Electrical
LED Wattage (Per meter): 7W
Input Voltage: 12v DC
Current (A): 0.58A/m
Cable in: 2000mm 2 core with micro connector (as standard) for seamless installation with our professional cabinet LED drivers & sensor range.
Cable out: 200mm 2 core (as standard)
Dimensions
Width: 5mm
Height: 2mm
Length: 5m (as standard), available in bespoke custom cut to lengths, call us on 0116 406 2959, email us at sales@upriseled.com or send us a project request on 07957 180 481.
Installation
Cut points: 25mm
Cable: 2 core flat cable
Mounting: Strong adhesive backing tape (blue)
Guarantee
Certification: CE, RoHS
Warranty: 3 Years
Packaging
Packaging: 5M Roll as standard.
Net Weight: 152g/Roll
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
Can you custom cut this strip to length?
We can custom cut your LED tape lights, Neon Flex and LED extrusion profiles to exact specification. Contact us for more information.
What aluminium LED extrusions can I fit this into?
This product is 5mm and will fit into all LED profiles with an inside width of 5mm and above.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@upriseled.com and a member of our team will help you with your project.
What support will I receive once I've purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we're here to help.
*Priced per meter.
A super slim white 5mm cob led tape light that offers seamless light throughout the strip. Using the highest grade, latest generation micro LED chips this professional COB LED tape light is ideal for bespoke kitchens, furniture lighting and media unit integration. This ultra energy efficient strip is just 7-watt per meter. 3000K warm white or choose from 4000K neutral / 6500K cool white temperatures. It's ideal for tight grooves, cabinet displays or shelving units. Complete with hand soldered pre- 2M tail for plug & play connection our our range of 12V cabinet LED drivers. Save time from project start of spec to long-term satisfaction.
How to connect COB LED tape lights simply.
--
Seamless PRO COB LED Tape 7W per meter (5M) IP20
Supplied as 5M reel as standard. Enterprise class quality with the latest in integrated LED technology.
Article - The Definitive Guide to COB LED Strip Lights
Seamless cob LED tape by Uprise. A revolutionary new PCB design mounted LED strip light with a uniform "micro dot" LED configuration for the most beautiful light line you've ever witnessed. Our 5 watts per meter flexible COB (Chip on-board) LED strip light provides a stunning flow of ambience throughout. Innovative cut of the cloth design means LEDs are closely knitted directly to the PCB substrate. A clever design that offers maximum efficacy and flexibility. This combined with a unique "bubble doming" silicone coating method ensures a stable, reliable solution for professional integrations. Lighting brilliance to put it simply.
Wiring Example
This precision engineered 12V COB LED tape strip is just 7W/M offering excellent efficiency and upto 700 lumens per meter output. 480 LEDs per meter allow for a continuous, homogeneous illumination throughout the strip. Available colours include 3000K warm, 4000K neutral and 6500K cool.
Lifetime expectancy is 50,000 hours of continuous use. 25mm cut points. 5mm wide. 12V. 2 core wiring.
Here at Uprise we aim to provide the utmost value and integrity throughout the entire supply process. From first point of call to happy result. That's why we ensure carefully selected high tolerance components are utilised. This means we've done our due diligence throughout the design and selection process ensuring premium quality throughout. High grade LED chips have been utilised for superior quality in strip longevity and effect.
Specifications
General
Product Type: Seamless No Dot LED Tape (7W/M)
Colour: Warm White (3000K)
IP Rating: IP20 (Internal)
PCB Colour: White
Chip: COB (Chip on board) Flip Chip Technology
LEDs per meter: 480LEDS
LED Life: 70% @ 50,000 Hours
Brand: Uprise
Light Characteristics
Lumens/m: 450-550lm/m
Lumens/w: 72lm/W
High CRI: 90+
Beam angle: 180°
Electrical
LED Wattage (Per meter): 7W
Input Voltage: 12v DC
Current (A): 0.58A/m
Cable in: 2000mm 2 core with micro connector (as standard) for seamless installation with our professional cabinet LED drivers & sensor range.
Cable out: 200mm 2 core (as standard)
Dimensions
Width: 5mm
Height: 2mm
Length: 5m (as standard), available in bespoke custom cut to lengths, call us on 0116 406 2959, email us at sales@upriseled.com or send us a project request on 07957 180 481.
Installation
Cut points: 25mm
Cable: 2 core flat cable
Mounting: Strong adhesive backing tape (blue)
Guarantee
Certification: CE, RoHS
Warranty: 3 Years
Packaging
Packaging: 5M Roll as standard.
Net Weight: 152g/Roll
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
Can you custom cut this strip to length?
We can custom cut your LED tape lights, Neon Flex and LED extrusion profiles to exact specification. Contact us for more information.
What aluminium LED extrusions can I fit this into?
This product is 5mm and will fit into all LED profiles with an inside width of 5mm and above.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@upriseled.com and a member of our team will help you with your project.
What support will I receive once I've purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we're here to help.
*In stock UK for next day delivery or same day collection (Lutterworth, Leicestershire).
Product System Compatibility
2M 3 Wire (CCT) Extension Lead - 2M Plug & Play 3 Core (3 Wire) CCT / Digital Pixel Extension Cable With Input-Output Micro Connectors
500mm 3 Wire (CCT) input cable - 0.5M 3 Core (3 Wire) CCT LED Extension Cable With Male Connector & Bare Ends
Features
1x 6 output splitter (3 wiring cores) for RGB 12V, 24V / 5V Digital Pixel / CCT LED tape, spotlights, lightbars and LED lamps.
Extend upto 6 lighting connections with this 6 way distributor
Small and sleek design for tidier integration.
Easy connection system for plug and play setup.
Works with 5V, 12V or 24V (5-50V) LED lights.
Uprise supply various compatible LED lights, Strip Lights, Spot Lights and plug & play LED driver kits, please search our store or call us on 0116 406 2959 or email us at sales@upriseled.com for more further project completion support.
Benefits
Quick and easy installation, plug and play.
Many configurable options, low cost.
International testing and certification makes it a safe option for commercial usage.
Very efficient resulting in greater energy saving along with time saved installing.
Sleek shape with small size for a tidy integration.
Connectivity Examples
Mains > 5V / 12V / 24V Power Supply (PSU) > *6 Way Splitter Distributor > [Male] 2M 3 Core Extensions Cable [Female] > [Male] 3 wire LED light source (CCT LED strip light or cabinet light).
Mains > 5V / 12V / 24V Power Supply (PSU) > Wifi LED Controller Receiver > *6 Way Splitter Distributor > [Male] 2M 3 Core Extensions Cable [Female] > [Male] 3 wire LED light source (CCT LED strip light or cabinet light).
Technical Specification
Voltage: 5V / 12V / 24V (5-50V)
Max Current: 3A (Entire splitter) or 0.5A per connection port.
Max Wattages: 5V (15W) / 12V (36W / 24V (72W) at 3A total system load.
Number of Ports: 6
Cable Gauge: 22 AWG
Wiring Cores: Max 4 wires per connection port.
Input Cable Length: 200mm
Input Cable Type: 3 wire 22AWG.
Material: Plastic
Colour: White
Guarantee: 3 Years
Certification: RoHS, CE
All products to be installed by a technically competent person in accordance with BS7671 and all other local regulations and safety standards.
8mm 6000K warm white LED tape. Seamless lighting made simple.
This 9.6 watt 6000K cool white LED strip light is a roll-out LED lighting source that is both compact and flexible, making it ideal for a wide range of applications. This slim LED ribbon, which uses 120 3528 SMD branded LEDs and is manufactured to a high quality standard, drawing only 9.6 watts per meter. Life expectancy of this luminous LED tape is 50,000 hours of continuous use.
Light Diffusion
As standard our LED strip lights offer a smooth linear effect when illuminating any surface. Optionally, you can use these LED strip lights together with our aluminium extrusions, also known as LED profiles. Fitted within profiles, the LED strip light source will be evenly diffused.
Wiring Example
Choose your length
This 9.6-watt LED tape may be purchased in standard 5M reels and cut at every 100mm soldered (copper coloured) part of the circuit. Uprise can cut your tape to size if you need specific lengths, whatever size.Call us on 0116 406 2959 or email us sales@upriseled.com with your requirements.
Application
This LED tape light is suitable for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. For a more seamless finish it can also be placed within aluminium LED profiles for a more complete look.
The LED strip light is available in several IP rating options ranging from IP20 at 8mm wide through to an IP67 rating. An IP67 rating provides full dust and low immersion protection. It can be used, when water resistance is needed, within bathrooms, external areas or water features.
IP Rating Options
This bright LED tape is IP20 and ideal for internal applications. Further waterproofing options are available such as IP65 heat shrink (splash proof) and IP67/68 on request. Contact us on 0116 406 2959 or send us a message at sales@upriseled.com if you wish to talk to a lighting expert. We will guide you to select the right strip to apply.
Environments
For commercial applications this strip light offers brilliant illumination suited for luxury resorts, restaurants, bars, hotel lobbies and for retail environments and window displays. If there is a need for slimline, bright, long lasting LED tape strips this product is a great consideration for architects, lighting designers, audio visual integrators and electrical professionals alike.
It’s also ideally suited for external residential garden spaces such as decking edge lighting, garden bars and steps as well as living rooms, kitchens and home cinemas.
Quality Assurance
Uprise believes in long term value, that’s why our enterprise class LED tape lights use premium grade, long lasting components. Colour consistency and uniformity is a project must, so all our LED strip lights are batched for overall peace of mind.
Looking to dim your LED strip lights, Uprise offers a comprehensive range of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. You can also check out our new Dim to Warm & Seamless COB flexible LED strips for beautiful visual aesthetics and end dimming results.
Specifications
General
Product Type: Single Colour LED Tape
Colour: 6000K white (cool white)
IP Rating: IP20 (internal)
PCB Colour: White
Chip: 3528 SMD
LEDs per meter: 60LEDs
LED Life: 70% @ 50,000 Hours
Brand: Uprise
Light Characteristics
CRI: CRI80
Beam angle: 120°
Electrical
LED Wattage (Per meter): 9.6W
Input Voltage: 24V
Current (A): 0.6A
Cable in: 500mm 2 core (as standard)
Cable out: 500mm 2 core (as standard)
Dimensions
Width: 8mm
Height: 2mm
Length: 5m (as standard)
Installation
Cut points: 100mm
Cable: 2 core flat cable
Mounting: 3M backing tape
Guarantee
Certification: CE, RoHS
Warranty: 1 Years
Packaging
Packaging: 5M Roll
Net Weight: 152g / Roll
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
Can you custom cut this strip to length?
We can custom cut your LED strip lights, Neon Flex and LED extrusion profiles to exact specification. Contact us for more information.
What aluminium LED extrusions can I fit this into?
This product is 8mm and will fit into all LED profiles with an inside width of 8mm and above.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@upriseled.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
6000K cool white LED tape. Seamless lighting made simple.
This 4.8 watt 6000K cool white LED strip light is a roll-out LED lighting source that is both compact and flexible, making it ideal for a wide range of applications. This slim LED ribbon, which uses 60 3528 SMD branded LEDs and is manufactured to a high quality standard, drawing only 5 watts per meter. Life expectancy of this luminous LED tape is 50,000 hours of continuous use.
Light Diffusion
As standard our LED strip lights offer a smooth linear effect when illuminating any surface. Optionally, you can use these LED strip lights together with our aluminium extrusions, also known as LED profiles. Fitted within profiles, the LED strip light source will be evenly diffused.
Wiring Example
Choose your length
This 4.8-watt LED tape may be purchased in standard 5M reels and cut at every 100mm soldered (copper coloured) part of the circuit. Uprise can cut your tape to size if you need specific lengths, whatever size.Call us on 0116 406 2959 or email us sales@upriseled.com with your requirements.
Application
This LED tape light is suitable for fitouts within cabinet displays, under pelmets, shelves, signage and within coves.
This LED strip lights is available in both internal (IP20) and splash proof (IP65) rated options.
IP Rating Options
This bright LED tape comes in either IP20 (internal) or IP67 rubber casing for splash proof, water resistant applications. Contact us on 0116 406 2959 or send us a message at sales@upriseled.com if you wish to talk to a lighting expert. We will guide you to select the right strip to apply.
Check our IP rating charts here for additional information about which strip is suitable for your application.
Environments
For commercial applications this strip light offers brilliant illumination suited for luxury resorts, restaurants, bars, hotel lobbies and for retail environments and window displays. If there is a need for slimline, bright, long lasting LED tape strips this product is a great consideration for architects, lighting designers, audio visual integrators and electrical professionals alike.
It’s also ideally suited for external residential garden spaces such as decking edge lighting, garden bars and steps as well as living rooms, kitchens and home cinemas.
Quality Assurance
Uprise believes in long term value, that’s why our enterprise class LED tape lights use premium grade, long lasting components. Colour consistency and uniformity is a project must, so all our LED strip lights are batched for overall peace of mind.
Looking to dim your LED strip lights, Uprise offers a comprehensive range of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. You can also check out our new Dim to Warm & Seamless COB flexible LED strips for beautiful visual aesthetics and end dimming results.
Specifications
General
Product Type: Single Colour LED Tape
Colour: 6000K white (cool)
IP Rating: IP20 (internal), IP65 Heat Shrink, IP65 Silicone (splash resistant), IP67 Rubber (splash-waterproof)
PCB Colour: White
Chip: 3528 SMD
LEDs per meter: 60LEDs
LED Life: 70% @ 50,000 Hours
Brand: Uprise
Light Characteristics
CRI: CRI80
Beam angle: 120°
Electrical
LED Wattage (Per meter): 4.8W
Input Voltage: 24V
Current (A): 0.6A
Cable in: 500mm 2 core (as standard)
Cable out: 500mm 2 core (as standard)
Dimensions
Width: 8mm (IP20, IP65HS, IP65S), 11mm (IP67)
Height: 2mm
Length: 5m (as standard)
Installation
Cut points: 100mm
Cable: 2 core flat cable
Mounting: 3M backing tape
Guarantee
Certification: CE, RoHS
Warranty: 1 Years
Packaging
Packaging: 5M Roll
Net Weight: 152g / Roll
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
Can you custom cut this strip to length?
We can custom cut your LED strip lights, Neon Flex and LED extrusion profiles to exact specification. Contact us for more information.
What aluminium LED extrusions can I fit this into?
This product is 10mm and will fit into all LED profiles with an inside width of 10mm and above.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@upriseled.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
Cabinet LED Drivers Q&A Sheet PDF--60W 6 Output Cabinet Display LED Driver 24V (Includes hand sensor)
This 6 output, slimline cabinet LED driver by Uprise offers quick and simple PowerUp to single colour LED tape lights. Ideal for areas where space is limited and a thin LED power source is required. With it’s 60W capacity and 6 micro connectors upto x6 24V LED products / LED tape strips can be connected effortlessly. Complete with next generation hand wave technology means turning your lighting setup on/off has never been easier.
Download Cabinet LED Drivers Q&A Sheet PDF for more support.
Outputs
With 6 micro connectable outputs you can easily run 6 separate LED areas or shelves.
Hand Sensor
Complete with a detectable hand sensor, turning your lights on/off has never been easier.
Power Consumption
Our PowerUp cabinet display LED PSU is rated at 60W.
Size
Ultra thin design at just 18mm depth for hidden installation. 165mm x 55mm x 18mm
Wiring
6 outputs with DuPoint terminals. Keep wiring tidy and professional.
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our PowerUP LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 24V seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 60W - 10% (54W) to build in a safety buffer.
Application
A thin and functional LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
The driver is only 4mm wide and standard IP20 rated. This provides complete protection against solid items over 12.5mm like finger touch. LED strip lights with IP20 rating are perfect for inside applications.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this PowerUp 60W LED driver with a range of our seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Color consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: 6 output cabinet LED driver
IP Rating: IP20
Brand: PowerUp
Electrical
Power Range: 18W-60W
Input Voltage: 100-240V
Output Voltage: 24V
Output Current (A): 2.5A
Outputs: x6 micro connectors
Power Factor: 0.6
Efficiency: 83%
Dimensions
Width: 55mm
Height: 18mm
Length: 165mm
Installation
Mounting: x2 Screws
Guarantee
Certification: CE, RoHS
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 370g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 24V 2 core single colour LED tape strip or 24V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
60W 7 Output Cabinet Display LED Driver 12V
Note: This driver requires a UK/Euro/US C7 Mains lead.This 7 output, slimline cabinet LED driver by Uprise offers quick and simple PowerUp to single colour LED tape lights. Ideal for areas where space is limited and a thin LED power source is required. With it’s 60W capacity and 7 micro connectors upto x7 12V LED products / LED tape strips can be connected effortlessly. Compatible with next generation hand wave sensors as well as single and double door sensors means turning your lighting setup on/off has never been easier. Download Cabinet LED Drivers Q&A Sheet PDF for more support.
Outputs
With 7 micro connectable outputs you can easily run 7 separate LED areas or shelves.
Connectable Accessories
Connect a hand wave, touch, or even a single door or double sensor (inline or master).
Power Consumption
This cabinet LED driver is rated at 60W.
Size
Ultra thin design at just 18.5mm depth for hidden installation. 204mm x 56mm x 18.5mm
Wiring
7 outputs with micro connection terminals. Keep wiring tidy and professional.
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our Uprise LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 12V marker LED downlights, cabinet pad downlights, seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 60W - 10% (54W) to build in a safety buffer.
Application
A thin and functional LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
The driver is only 4mm wide and standard IP20 rated. This provides complete protection against solid items over 12.5mm like finger touch. LED strip lights with IP20 rating are perfect for inside applications.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this PowerUp 100W LED driver with a range of our seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Color consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: 7 output cabinet LED driver
IP Rating: IP20
Brand: Uprise
Electrical
Power Range: 18W-60W
Input Voltage: 200-240V
Output Voltage: 12V +/- 5%
AC Input Current: 0.36A
3A Port: 7
5A Port: 1
Outputs: x7 micro connectors
Wattage: 60W
Voltage: 12V
Surge Protection: 1.5Kv
Sensor Connectivity
Sensor Port: PHB 2.0
Sensor Compatibility: Hand Wave Sensor / Touch Sensor / Single Door Switch / Double Door Switch
Dimensions
Width: 54mm
Height: 18.5mm
Length: 136mm
Installation
Mounting: x2 Screws
Guarantee
Certification / Standards: CE, SELV, RoHS, UKCA
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 375g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 12V 2 core single colour LED tape strip or 12V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
60W 7 Output Cabinet Display LED Driver 12V
*Includes x1 white coloured 1M (1000mm) UK mains plug to C7 kettle lead.
This 7 output, slimline cabinet LED driver by Uprise offers quick and simple PowerUp to single colour LED tape lights. Ideal for areas where space is limited and a thin LED power source is required. With it’s 60W capacity and 7 micro connectors upto x7 12V LED products / LED tape strips can be connected effortlessly. Compatible with next generation hand wave sensors as well as single and double door sensors means turning your lighting setup on/off has never been easier. Download Cabinet LED Drivers Q&A Sheet PDF for more support.
Outputs
With 7 micro connectable outputs you can easily run 7 separate LED areas or shelves.
Connectable Accessories
Connect a hand wave, touch, or even a single door or double sensor (inline or master).
Power Consumption
This cabinet LED driver is rated at 60W.
Size
Ultra thin design at just 18.5mm depth for hidden installation. 204mm x 56mm x 18.5mm
Wiring
7 outputs with micro connection terminals. Keep wiring tidy and professional.
Testing
100% full load age testing, consistent with world lighting safety standards.
Circuit Protection
Open circuit, short circuit, overload and overheating protection.
Standards
All of our Uprise LED drivers are TUV/CE/SAA/ETL/FCC approved.
Choose your lengths
This product is compatible with all our 12V marker LED downlights, cabinet pad downlights, seamless cob and single colour LED tape lights. Simply decide the lengths required and ensure that the total wattage across all lengths when totalled does not exceed 60W - 10% (54W) to build in a safety buffer.
Application
A thin and functional LED driver that’s best suited for fitouts within cabinet displays, under pelmets, shelves, signage and within coves. It’s also suited for many other applications whereby space is limited and multiple lengths of LED strips are desired.
The driver is only 4mm wide and standard IP20 rated. This provides complete protection against solid items over 12.5mm like finger touch. LED strip lights with IP20 rating are perfect for inside applications.
IP Rating
This LED supply is IP20 rated and suitable for internal applications.
Environments
Create a stunning, continuous visual aesthetic within the home, add beauty to your walk in wardrobes, designer cabinets, or prestigious wine racks by combining this PowerUp 100W LED driver with a range of our seamless cob LED tape lights.
Quality Assurance
Uprise believes in long-term value, which is why our enterprise class LED tape lights include high-quality, long lasting components. Color consistency and uniformity are important for the right finish for all our LED strips.
Uprise offers a wide variety of wall & DMX controllers, receivers and Dali, 0-10v dimmers, Triac Dimming (Mains) and alternatives. For splendid visual aesthetics and end dimming results, you can also view the Dim to Warm & Seamless COB flexible LED strip
Specifications
General
Product Type: 7 output cabinet LED driver
IP Rating: IP20
Brand: Uprise
Electrical
Power Range: 18W-60W
Input Voltage: 200-240V
Output Voltage: 12V +/- 5%
AC Input Current: 0.36A
3A Port: 7
5A Port: 1
Outputs: x7 micro connectors
Wattage: 60W
Voltage: 12V
Surge Protection: 1.5Kv
Sensor Connectivity
Sensor Port: PHB 2.0
Sensor Compatibility: Hand Wave Sensor / Touch Sensor / Single Door Switch / Double Door Switch
Dimensions
Width: 54mm
Height: 18.5mm
Length: 136mm
Installation
Mounting: x2 Screws
Guarantee
Certification / Standards: CE, SELV, RoHS, UKCA
Warranty: 3 Years
Packaging
Packaging: White cardboard box
Net Weight: 375g
I need help designing my project, can you help?
Our team of LED experts can assist you with your design from start to finish. You will be provided with a quotation, wiring diagram and support documentation to help get the result you deserve.
What style of LED tape lights is this compatible with?
This driver is compatible with any 12V 2 core single colour LED tape strip or 12V LED source such as lamps, battens or marker LEDs. Contact us for more information.
How can I buy?
You either buy individual components online or call us on 0116 406 2959 or email us at sales@uprisemed.com and a member of our team will help you with your project.
What support will I receive once I’ve purchased?
Our aim is to ensure you get an end result that you are completely satisfied with, we’re here to help.
